How to Install a Cooler Master Hyper 212 – Complete Guide

Before installing the Hyper 212 cooler, you must take your motherboard out. This will open up the rear side of your motherboard so that you can remove the PC panel. Then, drag the two black brackets that enclose the CPU slot on an AMD motherboard. Each frame is secured with four screws on each edge. AMD motherboards come with pre-installed brackets. Then, follow the steps to install the cooler. Cooler Master Hyper 212 RGB Black Edition comes with a single SF120R RGB 120mm fan.

The Cooler Master Hyper 212 RGB Black Edition is compatible with all modern AMD motherboards. The fan comes with the SF120R RGB 120mm fan, with two black brackets around the CPU socket. Once you have installed the fan, you should use the included paste to attach the fan to the CPU. You should apply the paste to the CPU and squeeze it until it forms a small blob.

The RGB Black Edition is priced at $35 on Amazon. You will receive a single SF120R RGB 120mm fan. The fan’s RGB LED controller allows you to easily customize your system’s appearance with thousands of customizable colors. You will also receive an improved universal fan bracket that makes installation a breeze. Once you have your new RGB fan, you’ll be amazed at how much easier it is.

The Hyper 212 RGB Black Edition is compatible with most modern desktop CPUs. The Hyper 212 supports LGA 1700 and can cool most mainstream CPUs. It can’t cool high-end processors, such as the 5950X and the 12900K, but it can handle most mainstream CPUs. Moreover, it can get noisy when you run a processor with a high TDP.

Installation of a second fan

If you’re looking to add a second fan to your Hyper 212 RGB Black Edition, there are a few things you need to know. First of all, make sure you have a standard RGB header. The RGB connectors on your power supply may not be on the motherboard, so you need to use a Molex to SATA adapter. If you do, you can attach the RGB cable to the Hyper 212 RGB Black Edition using the included connectors.

The mounting bracket is another essential component for this cooler. Most motherboards come with two black frames that wrap around the CPU socket. While these brackets are not necessary for the Hyper 212, you might want to have one on hand in case you need to install the cooler. You can save them for future use if you don’t want to remove them. Once you have installed the fan, you can mount it using screws.

The Hyper 212 EVO comes with one 120x120x25mm Xtra Flo fan. If you want to add a second one, you must remove the motherboard. You will need to remove the CPU and the motherboard to do this. After this step, you can install the second fan. The Hyper 212 EVO also comes with a power supply from Xigmatek. Make sure that the power supply is at least 1500 W.

Installation of a fan splitter

When installing a fan splitter for your computer, ensure that your motherboard’s mounting bracket is ready. Modern AMD motherboards have two black frames around the CPU socket. If it isn’t, you can easily remove it and store it for future use. The following steps will help you install a fan splitter for your computer. Please read the instructions carefully and follow them to the letter.

First, connect the two headers for the fans. Your motherboard will likely have two different fan headers for each fan. Connect your Hyper 212 RGB Black to a standard RGB header. Otherwise, you could damage your components by using the wrong one. Make sure to use a fan splitter that supports the correct connector size. This motherboard has good fan headers for the fans you’ll need.

If your CPU is an AMD model, you may need to apply thermal paste to the CPU before installing the fan splitter. Then, attach the fan splitter to the CPU’s motherboard header. Be careful while doing this process, as the blades of the heatsink may cut your fingers. However, this process is relatively easy once you know what you’re doing. And don’t worry about the noise – you’ll barely notice the fan splitter once the system is up and running.

Mounting brackets for a second fan

The mounting brackets for a second fan on the Cooler Master Hyper 212 are available for this case fan. The frame is pre-fitted with plastic clips and comes with rubber padding to protect it from excessive vibrations against the fins. The second 120mm fan can be mounted directly to the case panel or atop the case using the provided extra clips. However, this bracket may not be the best choice for server motherboards.

If you are installing the CPU cooler, the process is relatively simple. The manual that comes with the product should walk you through the installation step-by-step. The instructions are simple, and the mounting clips are easily accessed through the included installation guide. The structure is facilitated by a set of assembly diagrams and instructions. The cooling device cannot be installed until the CPU, heatsink, and CPU are correctly installed.

There are a variety of mounting brackets available for the Hyper 212. You can buy the original model for your CPU, and the LED model is also available. The Hyper 212 supports a variety of sockets, but AMD’s AM4 socket is marked with an asterisk. To purchase the correct model, visit Cooler Master’s official website. Alternatively, you can visit Newegg and find the updated version of the Hyper 212.

CDC (Continuous Direct Contact) design

The CDC (Continuous Direct Contact) design on the Hyper 212 EVO is a vital advantage of this cooling device. This design eliminates the gaps between the heat pipes and the base, increasing the thermal conductivity and allowing for a smoother base. In contrast, Direct Contact Heatsinks have multiple holes that allow for improved heat transfer but can also trap excess heat.

This design works by placing the heat pipes side-by-side, with no gaps, creating a uniform surface for heat transfer. The CDC implementation on the Hyper 212 EVO gives it 6% more contact surface, which means better cooling. To see the benefits of CDC, read Cooler Master’s infographic. You’ll be glad you did.

The foundation of the Hyper D92 consists of four copper heat pipes that are interspersed with rows of aluminum. The base is also a nice finish that matches the other Cooler Master closed-loop liquid coolers. Cooler Master’s Hyper D92 is compatible with AMD and Intel processors and comes with a PWM splitter and a tube of thermal paste.

The Cooler Master Hyper 212 EVO will arrive on the market in October 2011. The company has not stated what other more extraordinary specifications will change, but it’s expected to be compatible with the latest sockets from AMD and Intel. Cooler Master is committed to keeping its customers happy with high-performance cooling products and is excited to share the latest technology with the PC community.

Silent Flow fan

The Hyper 212 comes with mounting hardware and a bare 120mm fan. It can also be installed in push-pull or dual-fan configurations. You will also need thermal grease and spring-loaded screws to install the Hyper 212. This guide will walk you through the process. However, this one will be beneficial if you have ever installed CPU coolers. You will learn how to install this CPU fan and get the most out of your system.

Before you begin:


Read through the instructions provided with the cooler.
Follow all the steps carefully. If you do not, the installation may be more difficult.
Read the instructions carefully and use an asymmetrical tilt to install the cooler.
The Hyper 212 Silent Flow fan has four heat pipes that send hot air to a stack of aluminum fins. To install it, use the included brackets for AMD and Intel motherboards.

Once you’ve purchased a Hyper 212, installing the second fan is time. This cooler is specifically designed to have two fans. You must remove the motherboard before installing the second fan. Cooler Master also makes a good case. When you install the Cooler Master Hyper 212 Silent Flow fan, you’ll be glad you did. This computer cooling guide will make installation a breeze!